Contact Us: 1-440-250-1900

Inconel | What Are Some Popular Uses for Inconel?

Inconel is a material that is specifically optimized for some of the toughest use conditions found in manufacturing. While it might be more expensive than other metals, it’s worth it. It has some of the highest tolerance for extreme heat and doesn’t lose as much tensile strength at 2,000°F as most varieties of steel. Let’s take a look at some of the popular uses for Inconel.

Heat Treated Applications

Due to it’s resistance to extreme temperatures and its ability to retain enough strength at high temperatures, it is the ideal basket material for heat treat applications. Compared to most stainless steel alloys, a basket made from Inconel won’t lose shape as easily when holding parts through a rigorous heat treat application.

Jet Engines

Jet engines are incredibly unique in that they have to withstand extreme temperatures. At peak cruising altitude for a plane, the average air temperature is -69.3°F. The combustion process can exceed temperatures of 2120°F though. While cooling technologies are used, the temperatures still easily exceed the tolerances of many metals. Inconel 600 retains high oxidation resistance and tensile strength despite rapid changes in temperature from the combustion process and cooling technologies employed in the aerospace industry.

Exposure to Saltwater

Inconel is often used in marine applications because of its extraordinary resistance to salt. As a result, it can be ideal for situations and products that use salt or are located near the ocean.

Are You Looking for Inconel Products?

If you are in the market for materials that are resistant even to the most extreme of temperatures, contact us today.

 

Who offers inconel?

Radiant Tubes | Where Can I Find Radiant Tubes?

The performance of a heating system depends not only on the furnace burner but also on radiant tubes. These tubes are used to transfer heat to the load through irradiation. One place where you can find them is in radiant panel heating. Let’s take a look at some of the benefits of radiant tubes in radiant panel heating as well as where you can find radiant tubes.

Easily Zoned

Many radiant panel heating systems are designed for room-by-room zoning. This not only offers the potential for energy savings, it also allows different occupants to adjust rooms to their own desired comfort level.

Damage Resistant

Tubing or wiring encased in concrete floors is very resistant to damage from heavy interior traffic. Likewise, heated ceilings are typically “above the fray” and thus less likely to be damaged by normal building usage.

Virtually Noise-Free

Properly designed and installed systems eliminate expansion noise, sheet metal vibration, or velocity noises caused by fast moving air.

Fast Drying

Not only does this improve safety, it also provides much better working conditions for those who routinely work on or near wet floors, especially in facilities such as auto service garages and fire stations.

Where Can I Find Radiant Tubes?

Radiant tubes can be used in a variety of products for a variety of uses. If you are looking for these kind of tubes, look no further than Ferralloy. We offer high-quality products at competitive prices. Contact us today to learn more about how we can get you radiant tubes for your next project.

 

What are radiant tubes?

Radiant Tubes | Should I Use Radiant Tubes?

Radiant tubes are used in situations where extreme heat is found. Radiant tubes are commonly found in heating systems. Various sizes and shapes of different heat resistant materials are used for these tubes depending on the specific need, service temperature, and furnace atmosphere. One of the places where you might find radiant tubes is in heating.

Radiant Panels

Wall and ceiling-mounted radiant panels are usually made of aluminum and can be heated with either electricity or with tubing that carries hot water. While they can be expensive to operate, they provide supplemental heating in some rooms. Radiant panels have the quickest response time of any heating technology and can be individually controlled for each room.

Radiant Floor Heat

There are three types of radiant floor heat that fit into two different types of installations. “Wet installations” make use of the large thermal mass of a concrete slab floor or lightweight concrete over a wooden subfloor, while “dry installations” occur when the installer “sandwiches” the radiant floor tubing between two layers of plywood or attaches the tubing under the finished floor. Wet installations are the oldest form of modern radiant flooring systems. Dry installations are becoming more and more popular though due to recent innovations in floor heating technology. These “dry” floors allow the cables or tubing to run in an air space beneath the floor making it less expensive to build.

Are You Looking for Radiant Tubes?

If you are in need of radiant tubes for your next project, look no further. At Ferralloy we offer top of the line tubes. Contact us today to learn more.

 

What are radiant tubes?

Heat Resistant Castings | Everything You Need To Know

When it comes to different types of projects involving metal parts, it’s important to consider the sensitivity of the metals you’re using. Depending on the project, you must make sure that the parts can withstand the processes you intend to use. One example of a process to be wary of is extreme heating. In the case of extreme heating, heat resistant castings would be best. Many industries benefit from this type of casting. These include air craft and aerospace, oil and gas, road construction, coal mining, steel production and processing, off road equipment, food equipment, railroad, biowaste and more.

What Are Heat Resistant Castings?

heat resistant castings

Heat resistant castings are castings that don’t melt or corrode during high-end industrial operations involving high temperatures. In fact, they have the capability of performing in conditions above 1200°F. Heat resistant castings are usually higher in alloy content than other types of castings. They mainly consist of nickel and chromium. Nickel is usually present in amounts of up to 70 percent. Chromium is usually present in amounts of 10 percent to 30 percent. Other elements, however, are used as well. These include iron, carbon, silicon, manganese and molybdenum.

If you have a project coming up that requires parts to perform at temperatures above 1200°F, Ferralloy Inc. assist you. Here at Ferralloy Inc., we can supply you with all of the parts you need for your heat resistant castings. Our products include trays, baskets, fans, furnace rolls, retorts, skid riders, muffles, roller rails, piers, grids, pickling hooks, walking beams, radiant tubes, fixturing, corrugated boxes, generator tubes, chain guides, pusher heads, heating elements, burner nozzles, hanger bars, tube support and enameling hangers. And if you need us to, we can make recommendations about which products are best for your specific wants and needs. So don’t hesitate any longer to start your project! Contact us today!

heat resistant castings help