Contact Us: 1-440-250-1900

Radiant Tubes | Facts About Radiant Heat

Radiant tubes are used in systems that require extreme heat above 1,200 °F. The goal of radiant tubes is to transfer heat to the load through irradiation. Heat exchange occurs when the combustion fumes are generated by the burner and then are conveyed through the tube. Let’s take a look at some facts about radiant heat that you might not know.

What is Radiant Heat?

Radiant heating is a simple system of tubing that is installed underneath the floor of a home or building. Hot water runs through these tubes to heat the area.

Does It Save Money?

The short answer is yes. Since radiant heat warms the room from the ground up, you don’t need to have the thermostat so high. Also, since the heat stays low less of it is needed to keep you and others warm.

Can Radiant Heating Systems Only Be Installed in New Construction?

The simple answer here is no. Radiant heating systems can be installed in any building no matter how old it is. It can also be installed individually in only certain rooms or spaces.

Can Radiant Heating Systems Freeze?

Freezing is rarely a problem with radiant heating systems. Usually keeping a system running, even at a lower thermostat setting will keep a system in working order.

Are You Looking for Radiant Tubes?

At Ferralloy we offer radiant tubes for even the most complicated of heating projects. Contact us today to learn more or to place an order for radiant tubes for your next project.

 

What are radiant tubes?

 

Radiant Tubes | Where Can I Find Radiant Tubes?

The performance of a heating system depends not only on the furnace burner but also on radiant tubes. These tubes are used to transfer heat to the load through irradiation. One place where you can find them is in radiant panel heating. Let’s take a look at some of the benefits of radiant tubes in radiant panel heating as well as where you can find radiant tubes.

Easily Zoned

Many radiant panel heating systems are designed for room-by-room zoning. This not only offers the potential for energy savings, it also allows different occupants to adjust rooms to their own desired comfort level.

Damage Resistant

Tubing or wiring encased in concrete floors is very resistant to damage from heavy interior traffic. Likewise, heated ceilings are typically “above the fray” and thus less likely to be damaged by normal building usage.

Virtually Noise-Free

Properly designed and installed systems eliminate expansion noise, sheet metal vibration, or velocity noises caused by fast moving air.

Fast Drying

Not only does this improve safety, it also provides much better working conditions for those who routinely work on or near wet floors, especially in facilities such as auto service garages and fire stations.

Where Can I Find Radiant Tubes?

Radiant tubes can be used in a variety of products for a variety of uses. If you are looking for these kind of tubes, look no further than Ferralloy. We offer high-quality products at competitive prices. Contact us today to learn more about how we can get you radiant tubes for your next project.

 

What are radiant tubes?

Radiant Tubes | Should I Use Radiant Tubes?

Radiant tubes are used in situations where extreme heat is found. Radiant tubes are commonly found in heating systems. Various sizes and shapes of different heat resistant materials are used for these tubes depending on the specific need, service temperature, and furnace atmosphere. One of the places where you might find radiant tubes is in heating.

Radiant Panels

Wall and ceiling-mounted radiant panels are usually made of aluminum and can be heated with either electricity or with tubing that carries hot water. While they can be expensive to operate, they provide supplemental heating in some rooms. Radiant panels have the quickest response time of any heating technology and can be individually controlled for each room.

Radiant Floor Heat

There are three types of radiant floor heat that fit into two different types of installations. “Wet installations” make use of the large thermal mass of a concrete slab floor or lightweight concrete over a wooden subfloor, while “dry installations” occur when the installer “sandwiches” the radiant floor tubing between two layers of plywood or attaches the tubing under the finished floor. Wet installations are the oldest form of modern radiant flooring systems. Dry installations are becoming more and more popular though due to recent innovations in floor heating technology. These “dry” floors allow the cables or tubing to run in an air space beneath the floor making it less expensive to build.

Are You Looking for Radiant Tubes?

If you are in need of radiant tubes for your next project, look no further. At Ferralloy we offer top of the line tubes. Contact us today to learn more.

 

What are radiant tubes?